Home > Machines> Tray sealers > TS
1000 
TS 1000
The TS-1000 fully automatic vacuum tray-sealing machine provides fast, economical and versatile packing
in high quantities in a short period of time with vacuum, gas flushing (MAP) or only simply sealing.
If high volume has to be packed this is the right machine for you. Simply load the filling trays onto the in-feed conveyor, the rest is done automatically by the TS-1000. The trays are transported out of the machine after
packing and can be labelled and weighed afterwards.
| Technical detail: | ||
| Pump Busch (cbm/h): | 63 | |
| Maximum tray dimension: | 370 x 350 x 120 mm | |
| Top film width: | 422 mm | |
| Max. diameter of top film: | 330 mm | |
| Film core: | 76 mm | |
| Voltage: | 400/3Ph+N+PE/50HZ,25 Amp, 8 kW | |
| Power (kW): | from 4 | |
| Compressed air consumption: |
approx. 50 ltr./cycle at 6 bar |
|
| Speed: | 6 cycles per minute, 360 cycles per hour | |
| Loading station: | 1.250 mm with 3 open spaces | |
| Loading hight: | 950 mm | |
| Height of exit conveyor: | 950 mm | |
| Outer dimensions: | 3100 x 990 x 1950 mm | |
| Weight: | approx. 1000 kg |
Standard equipment
- Gas flushing (MAP)
- 63 cbm/h Busch pump
- User friendly SPS sensor control board from Siemens (all parameters
can be changed and stored in this control board) - Error message display on control board
- Contour cutting around each tray
- Servo cycled chain in feed conveyor for the trays
- Exit conveyor
- Film transport with film break
- Filling plates for the vacuum chamber, resulting in faster vacuum times
and less gas usage - Stainless steal frame construction
- Trim removal system
- Integrated splash water resistant control box
- Quick changing of the die set
- Teflonised and temperature controlled sealing plate
- 6 different transport speeds
- Slow start and stopping of conveyor for liquids
- Air pressure sealing
- High security because of security covers on all movable parts
- Short construction but 3 loading zones free
- Oil change indicator
- Cycle counter
- Step vacuum
- Vacuuming up to the evaporation point
- Air pressure and gas pressure is controlled
- Simple change of film because of manual film transport
- 99 programms possible
- Control board password protected
- Service program for film and die set
Options
- 100, 160 or 250 cbm/h pump
- Special voltage upon request
- Connection to scale and labeler
- Longer loading station
- Tray sizes upon request
- Die set with 1,2 or 3 trays per cycle possible
- Photocell for printed top film
- Gasflushing with oxygen
Standard trays:
1/2 gastronorm single tool
Trays:
double tool
